static load
英 [ˈstætɪk ləʊd]
美 [ˈstætɪk loʊd]
网络 静载荷; 静荷载; 静载; 静力荷载; 静负荷
双语例句
- In this paper, all-purpose finite element program ANSYS was used to analyze the curve process of semi-rigid composite joints under static load.
应用有限元程序ANSYS分析了静力荷载作用下钢-混凝土半刚性组合节点的荷载和变形非线性性能。 - Dynamic load stimulated the growth of longitudinal diameter of long bone more greatly than static load.
动力性负荷对长骨长径生长的促进作用大于静力性负荷。 - Dynamic Strength of Concrete under Initial Static Load
初始静荷载下的混凝土动力强度研究 - PHC piles vertical static load bearing capacity test and comparative analysis of numerical simulation
PHC桩竖向承载力静载试验与数值模拟分析 - Can Static Load Test Reflect True Conditions of Composite Foundation?
静载试验能反映复合地基承载力的真实情况吗？ - The Comparative Test Research of Single Pile's Capacity of Enduring Compressive through Static Load Test and Dynamic Test Method
单桩竖向承载力静载荷试验和高应变动力检测对比试验研究 - Objective: To discuss the relation of lipid peroxidation to muscle injury caused by static load.
目的：探讨静态负荷致骨骼肌损伤与脂质过氧化的关系。 - Gravel pile; Composite foundation; Static load test; Pile-soil stress ratio.
碎石桩；复合地基；静载荷试验；桩土应力比。 - Simulation Analysis and Static Load Test of Bearing Capacity in Post Grouting Pile Foundation
后压浆桩基础承载性能的仿真分析与静载试验研究 - This paper deals with the structural characteristic of the Third Bridge of Yiyang Zijiang River, and the instrument, method and the result of static load and dynamical load test on new bridges.
介绍了益阳资江三桥的结构特点，以及成桥静、动力荷载试验的仪器、方法与测试结果。 - A method to study the behavior of axially loaded large diameter piles according to insitu static load test of an instrumented pile and theoretical analysis is presented.
提出了一个现场静载试验与理论分析相结合确定大直径桩竖向承载性能的方法。 - The brittle failure of the foundation bolt for ladle turntable under the static load and low stress happens due to unsuitable between intensity and toughness in this high strength steel.
介绍了钢包回转台地脚螺栓在低应力状态下发生脆性断裂的实例。证实了断裂是由选材不当、错误的热处理和安装方式等使强度与韧性不匹配造成的。 - Research on Application of Measured Quasistatic Generalized Influence Line in Static Load Test for Bridge Structure
实测准静态广义影响线在桥梁结构静载试验中的应用研究 - This paper deals with a structure model test under static load to study the stress characteristics of the structure.
本文介绍北京地铁西单车站一号施工横通道，与正洞导坑交接处开口段结构静载模型试验情况。 - Finite element simulation and analysis of static load testing of single piles based on GTS
软土地基中单桩静载荷试验的数值模拟基于GTS对单桩静载试验的有限元模拟分析 - The whole process of static load analysis for the crossed roller slewing bearings has been simplified.
整个过程简化了原交叉滚子转盘轴承的静载荷受力分析。 - Application of Singular Value Decomposition Method to Static Voltage Stability Analysis Considering Static Load Model
考虑负荷静特性的基于奇异值分解法静态电压稳定分析 - Load-Bearing Capacity Evaluation of a Suspension Bridge with Steel Truss Beam Based on Static Load Test
基于静载试验钢桁梁悬索桥承载能力评估分析 - The static foreaft stiffness of radial car tire was measured by a tire static load tester with additional tire foreaft stiffness testing device.
在加有轮胎纵向刚度测试附加装置的轮胎静负荷试验机上测试了轿车子午线轮胎的静态纵向刚度。 - Based on the reduced calculation to dynamic and static load, the article analyzes the tensile force and additional dynamic load which the chain stands in the movement.
基于实际中对动静张力的折合计算，分析了链条在运动过程中所受张力及附加动载荷。 - The results of the dynamic and static load test of a three-span continuous reinforced concrete combined beam are described.
简要阐述津滨轻轨静动载试验研究的目的、内容、试验荷载与加载方法，重点给出三跨连续钢混结合梁的静动载试验结果。 - Currently, static load models are still popular used in power industry for transient stability analysis.
基于在线测量数据，评估了采用静态负载模型进行暂态稳定分析的准确性。 - The relationship between equivalent static load and temperature field has been verified through tests.
文中还通过试验验证了上述当量静载与温度场的关系。 - There are many methods that can evaluate bridge bearing capacity, but static load test can evaluate the concrete bridge bearing capacity more accurately and effectively.
桥梁承载力的评估方法众多，而静载试验法可以对既有混凝土桥梁承载力做到准确、高效地评估。 - On the base of static load experiment and the finite element method, three major contents have been made.
简要介绍了城市轻轨钢轨道梁在工厂内进行静荷载试验的方法和步骤，同类工程具有借鉴意义。 - Bearing Behavior Analysis of Cast-in-place Pile with Branches and Plates Based on Static Load Testing
基于静载试验的支盘灌注桩受力性状分析 - FEM analysis using ANSYS software was carried out to study the stress and deformation of the structure of the paper pulp pad under the static load.
在机电产品的纸浆模塑衬垫设计中，利用ANSYS软件进行有限元分析，研究静载作用下的衬垫受力及变形情况。 - Finally, a field static load test of a engineering case is introduced and the test results and the calculation results are compared.
文末介绍了一个工程实例的现场载荷试验，并与理论计算值进行了对比。 - Through the test of pile static load test, the pile self balanced load test pile soil load transfer characteristics;
通过试桩静载荷试验，得出了自平衡试桩时桩土的荷载传递特性； - The law of critical depth varying with diameter and deviation distance and the hidden holes handling range under subgrade were found out; also the effects of dynamic and static load were compared.
找出了临界洞室埋深随洞径和偏移距离变化的规律，并确定出了路基下伏暗穴治理范围，同时对动、静荷载效应进行了对比分析。